Tuesday, September 26, 2023

Gas Oven Won T Light

Must read

The Stove Is Unplugged

How to repair a gas oven – Troubleshooting, won’t light stay on or heat up

First, check to see if your stove has power. We know, it seems incredibly obvious. You would know if your stove was plugged in or not, right? In reality, some of the longest, most frustrating repair investigations have ended in an eye-roll, realizing that a pet or child pulled the plug before your burner wouldnt start the first time.

Take a moment and peer around the stove. Make sure you can see the plug firmly set into the wall. If its not firmly set, reach back and push the plug into the wall firmly.

Check The Temperature Sensor

Like a thermostat, the temperature sensor regulates the oven temperature of your gas oven. It connects to the igniter switch. If the temperature sensor breaks, the oven will not light for safety reasons.

Troubleshooting and replacing this sensor is a fairly easy fix for a homeowner who is comfortable working on a gas oven.

  • Unplug the oven from the wall.
  • Find the temperature sensor, usually connected to or near the back wall of the oven.
  • Use a screwdriver to remove the sensor and use a multimeter tool to test it.
  • Before testing the sensor, check the manufacturers manual for the correct amount of resistance. The resistance will vary by model.
  • Set the multimeter to the RX1 setting and touch the sensor terminals with the tool to ensure the sensor resistance reading is within the correct parameters.
  • Replace the sensor if the reading is outside the correct range.
  • Why Is The Gas Stove Working But The Oven Is Not

    While your gas stove and gas oven are part of the same appliance, they do not use the same parts and components. This is why your gas burners can work while your gas oven wont light. Your gas range has its own set of igniters, gas valves and safety features. If everything is in working order, your range can work independently of your gas oven.

    However, if your gas oven is not receiving power, natural gas or propane, neither the oven nor the gas stovetop will work.

    Read Also: Induction Range With Convection Oven

    How To Replace A Gas Oven Igniter In 3 Steps

    Replacing a faulty gas oven igniter is a moderately easy DIY appliance repair. Estimated costs are between $40 and $80, depending on the cost of a replacement igniter. If you have a newer oven, check any manufacturer warranties before making any repairs.

    While a homeowner can do this project, ensure you take every safety precaution before attempting. Turn off the ovens gas supply and disconnect the appliance from the outlet. Remember to take precautions if you smell gas . Turn off the main gas supply to your home, open windows for ventilation, and call an appliance technician for assistance.

    Ge Oven Igniter Not Working Or Glowing

    Gas Wall Oven Won T Light

    If your GE oven igniter isnt working or glowing:

    • The safety gas valve that sends power to the igniter is faulty.
    • The igniter is bad and has no continuity.
    • The oven isnt receiving any gas, and neither is the ignitor .

    In the first two cases, the components need to be replaced. If the oven isnt receiving any gas, check if the gas hook-up valve is in the on position and if gas is coming into your home.

    For any of these causes of GE oven not lighting or igniting, call a GE oven professional to resolve any issues youre not sure you can handle or contact GE Support.

    Read Also: Ge Profile Electric Double Oven

    The Oven Safety Valve

    As the name implies, the oven safety valve is a fail-safe component that stops the release of gas into the oven if the igniter is not hot enough to light it. It consists of a metal body with a bimetal arm inside. As electricity from the igniter heats the interior component, the safety valve opens, releasing gas into the oven for ignition. If the safety valve has failed, it wont allow gas into the oven whether or not the igniter is in working condition, and no gas means no flame.

    Safety valves can usually be found in one of two places on the range. If you need help tracking yours down, heres where to look:

    1. On the back of the oven, behind an access panel, connected to a gas line that runs to the ovens burner.

    2. Inside the oven, beneath the bottom panel, heat spreader, and burner, usually mounted to the floor of the oven and against the back.

    Once you have access to the safety valve on your oven, its time to test it out. Youll need a multimeter, and you may need a pair of needle-nose pliers.

    • Set your multimeter to continuity. Youre testing to see whether the valve carries a charge.
    • Remove the wire connections to the safety valve. You may need a pair of needle-nose pliers to do this, as they can be wedged on pretty tight.
    • Touch a test probe to each terminal to test for continuity. If theres no continuity, the valve will need to be replaced.

    Your Ge Gas Oven Has A Defective Igniter

    If you have a GE gas oven thats not igniting or lighting, the heating elements issue in an electric oven turns into an igniter issue in a gas oven.

    A functional igniter in a gas oven is indispensable. It sends electric current to the oven through the safety valve and ignites the gas burners once you send the ignite command through a knob or switch. A faulty igniter wont be able to do this.

    Also Check: Ninja Foodi Xl Pro Air Oven Reviews

    How To Fix Ge Oven Power/gas Issues

    Youll need to determine which of the above issues is causing your GE oven not to light or ignite using the elimination method. In other words, check for each power issue, starting with the simplest to the most complex, until you can determine the cause.

    Heres what to do:

  • Ensure the socket supplying power to your GE oven is turned on.
  • Confirm that the GE oven cord is plugged well into the socket.
  • Assess the GE oven cord for damage. If there are any frayed wires or breakages, replace the cord.
  • Check if the circuit breaker switch supplying power to the oven is tripped . If it is, turn it back up to send power to the oven. If the switch feels rigid, call a trained electrician to assess the circuit breaker for faults.
  • Test the wall outlet for voltage. A properly working outlet should read around 110-120 volts for gas oven outlets and 220-240 volts for electric oven outlets.
  • Check the gas hookup to the oven and your home to ensure its turned on. If it is, turn on another gas-powered appliance in your home to confirm that youre receiving a gas supply. If the appliance works, your oven has issues with other igniting parts like the spark electrode, thermostat, or control board. If the other appliance isnt receiving gas either, contact the supplier to restore gas to the home.
  • Check this YouTube video for a demonstration of how to test a wall outlet for voltage:

    Gas Oven Wont Turn On But The Stovetop Works

    GAS OVEN WON’T LIGHT? How To Replace Oven Igniter -Jonny DIY

    In this part, our experts tried to give you simple step-by-step instructions, and we are sure that they will help you to find the cause of the problem and fix it so that you can get back to using your oven again. However, if at any time you feel like you are in over your head, turn the job over to a qualified third party. Why take the risk of burns or worse? You will need a few tools and replacement parts to take on the fix yourself. Either way, youll want to act fast because this problem will not get better and it will cause a significant disruption in your daily life until you handle it.

    You May Like: Enamled Cast Iron Dutch Oven

    Check The Other Oven Ignition Components

    So what if the igniter doesnt glow?

    If the igniter doesnt glow, then one of the components in the ignition system is broken.

    Use your multi-meter to check the wiring, igniter and safety gas valve for continuity.

    First, unplug the range to disconnect electrical power.

    Pull the range forward and remove the back panel to access the electronic control board.

    Unplug the yellow wire from the Bake spade and the white wire from the Neutral spade on the control board. Measure the resistance through the yellow and white wires. You should measure between 10 and 2000 ohms through those wires. If so, then youll likely need to replace the electronic control board because the all of the other components in the circuit are okay.

    If you measure an open load through the yellow and white wire, then you have a bad igniter, a failed safety gas valve or a break in the wiring.

    Check the resistance directly at the igniter. You should measure between 10 and 2000 ohms through the igniter. If you measure an open load through the igniter, replace it.

    If the igniter is okay, check the safety gas valve. You should measure about 1 ohm or resistance through the safety gas valve. If you measure open load, replace the safety gas valve.

    These troubleshooting tips should help you figure out whats wrong with your gas oven when the burner wont ignite.

    Schedule a repair

    The Oven Wont Heat To The Right Temperature

    An oven not heating evenly could indicate a problem with the temperature sensor or the heating element. Follow these steps to check the temperature sensor:

  • Make sure that the sensor is not touching the inside wall of the oven.

  • Use an ohmmeter to ensure the sensor is functional. The resistance should rise as the temperature of the oven increases. If the ohmmeter shows that the sensor is not working, replace it.

  • If your gas oven is still not heating after checking or replacing the temperature sensor, you may have a problem with the gas igniter. If thats the case, follow the steps in The Oven is Not Heating.

  • Once everything has been checked or replaced, recalibrate the oven.

  • Heat the oven to 350 degrees Fahrenheit. Check the temperature inside the oven with an oven thermometer after 20 minutes. Continue checking the temperature every 20 minutes for the next 90 minutes to two hours.

  • Add up the sum of the temperature readings and divide by the number of readings you took to get the average temperature of the oven.

  • Adjust the ovens temperature dial accordingly.

  • Don’t Miss: Make Asparagus In The Oven

    Is The Igniter Working

    If your gas oven is not turning on, it is most likely because of a fault with the igniter. When the igniter draws a specific amount of electrical current through the ovens safety valve, the valve opens and allows gas to flow into the oven burner. The igniter can then get hot enough to ignite the gas in the burner assembly. A weak igniter will fail to open the safety valve correctly, and the oven will not heat.

    To Check the Igniter:

  • Visually inspect the igniter when the oven is on. If the igniter glows but does not ignite the gas flame after 90 seconds, the igniter is likely too weak to open the safety valve. If the igniter is defective, it will need to be replaced.
  • When observing the igniter, if it does not glow, then there is likely a fault with the igniter, and it will need to be tested with a multimeter to determine if it needs to be replaced.
  • My Cooker Is Not Lighting

    My Belling Gas Oven Wont Stay Lit

    If you have come to use your cooker but found that it simply won’t ignite, you are at the right place to try to diagnose the cause. We list some of the parts that could be at fault for your oven ignition failing to produce a flame – and give advice on how you can confirm if they are indeed the cause of why your cooker is not lighting.

    Regular maintenance of your cooker could help prevent unforeseen faults, however from time to time you could go to use your cooker and find that the oven simply will not ignite.

    If you choose to have a gas cooker in your home compared to an electric appliance, this could be a problem which if not resolved could plague the effectiveness of your cooking and baking.

    Here we have the possible reasons as to what could be causing your cooker not to be lighting correctly, and we explain what you need to check to identify if any of these causes are to blame for the problem.

    Cause 1

    Also Check: Whole Chicken Roaster Oven Recipes

    How To Fix Amana Gas Oven Wont Light

    1. Check the gas supply:

    One of the main reasons why the gas oven doesnt light is due to inadequate gas supply. Make sure the oven is getting an adequate amount of gas, an uninterrupted gas supply is very necessary to light and run a gas oven.

    If the gas pressure is satisfactory then maybe theres a gas leak somewhere. Stay alert for any foul smell in the kitchen. If you cant figure out where the gas is leaking from, just make sure to turn off the main gas supply and open all the doors and windows.

    A gas leak can turn into a serious health hazard if you dont manage the situation properly.

    2. Clean the burner.

    If the gas burner is dirty the oven would simply not get lit. More than usually food particles and carbon residuals tend to clog the burner. A clogged burner cannot retain the flame for long. In that case, youll have to clean the burner before moving forward.

    All burners are covered by a grate, to clean the burner youll have to first remove the grate, then uncover the burner cap and clean all the surroundings. Use tissue paper or a slightly wet kitchen towel to remove the residual dirt, let the burner dry before you cover it with the burner cap and grate. Dont forget to clean the burner cap and grate as well.

    3. Faulty Ignitor?

    4. Did the thermostat stop function?

    Now, if you are suspecting a thermostat malfunction it is best to get it examined by a qualified professional before you make the change yourself.

    Concluding thoughts:

    What Customers Are Saying:

    Thank you for the expeditious answer. It’s good to know you’re out there and awake in the wee hours when I finally have time to ask questions about my Jenn Air.

    JeanRiverhead, NY

    You did one super job of explaining to me everything there is to know about this fridge. I’m looking forward to asking you questions in the future.

    JimmyBagley, IA

    Wonderful service, prompt, efficient, and accurate. Couldn’t have asked for more. I cannot thank you enough for your help.

    Mary C.Freshfield, Liverpool, UK

    This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

    AlexLos Angeles, CA

    Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

    GPHesperia, CA

    I couldn’t be more satisfied! This is the site I will always come to when I need a second opinion.

    JustinKernersville, NC

    Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

    EstherWoodstock, NY

    Read Also: Cook Bacon In Convection Oven

    How To Fix A Defective Ge Oven Bake Or Broil Element

    First off, you need to know which of the two elements is defective. The broil element supplies minimal heat in cycles during the baking process. The bake element doesnt heat up during the broil cycle. You should, therefore, try both cycles before deciding that the oven isnt igniting or lighting at all.

    If youve determined that the elements arent igniting, youll need to assess them for damage and continuity and replace them as required. To do that, follow these steps:

  • Disconnect power to the oven and remove the plug. Alternatively, cut the power at the circuit breaker.
  • Remove the oven racks to make space and access the elements.
  • Locate the bake element at the bottom of the oven and the broil element at the ovens roof. Assess each for damage in turns. A damaged bake or broil element may show cracks, blisters, or broken parts.
  • If the elements dont show any signs of damage, remove them to test for continuity. Youll need to remove screws in both cases to release the elements.
  • Detach the wires from the elements and pull them a little into the oven to prevent them from sinking back into the back of the oven wall.
  • Probe the isolated elements for continuity by placing a prod of the multimeter on each of the heating elements terminals. The element should record about 10-50 ohms if its sound. If no reading is recorded, the heating element is dead and needs replacement.
  • Test the oven to see if it ignites.
  • Diagnosing Problems Through Noise

    Whirlpool Gas Oven Clicks But Wont Lite – EASY FIX

    Most often, appliance owners are able to diagnose igniter problems through noise alone. By listening to your gas oven, you can actually tell if igniter problems are coming. Obviously, the most concrete sign is when your oven isnt producing heat. As there is no electric element in a gas oven, when the igniter doesnt work, the oven can produce no heat. Though often, signs of the igniter going outcome before this happens.

    One noise you want to look out for is a loud boom noise. You can expect to hear gas hissing and then a whoosh as it ignites, but if you hear a relatively loud boom, as in one you can hear in another room, then that is cause for concern. What is actually happening is that the igniter is not working properly, but is still working. The gas is released and built up until when it finally does ignite, it causes a small explosion. This signals slow ignition that most likely comes from dirty igniters. This needs to be addressed as soon as possible because obviously, it is potentially dangerous and hard on your gas oven as well.

    Don’t Miss: Baking Pans For Air Fryer Oven

    More articles

    Latest article

    Lg Air Fry Oven Recipes

    Air Frying In Convection Oven

    Ge Cafe Double Wall Oven